Date: 05/25/2009
Date: 05/25/2009
tools: tire changing machine Date: 05/25/2009 3 small tire irons, 2 rim protectors and more plastic for protecting the rim -- all one needs to change a tire.
tools: rubber lubricant Date: 05/25/2009 This makes job much easier. Some people like using soapy water, I bought a gallon of something that is safe for both -- a rim and a tire. with 4-6 tire changes a year, 1 gallon of this stuff will last for many, many years.
tools: balancer Date: 05/25/2009 The most expensive of all my tire changing tools - static wheel balancer by Marc Parnes http://www.marcparnes.com/. I had to buy it as K12gt has single side swingarm and the wheel doesn't have axle/bearings.

This is a really nice, high quality, tool. Plus, I found regular use for jack stands, too.
tools: bead breaker Date: 05/25/2009 8' 2"x4" works great if you have something heavy to stick it under. A car will do, for example, but I have a workbench, so I use that.
tools: bead breaker (closeup) Date: 05/25/2009 a small piece of 2"x4" under 8' lever, and bead breaks with ease. Not as convenient as purpose built bead breaker, but the price is right and replacement parts available in your local friendly Home Depot or hardware store.
tools: knees Date: 05/25/2009 Another thing you need for this cheap tire changing to work, is good knees. That can be substituted with a helper, though. Good knees make it a one person job :-)

The idea is that you have to push the opposite side of the tire inside of the rim to gain as much clearance as you can. This makes popping the tire over the rim really easy and doesn't require much force. Lubing the edge of the rim and the tire bead helps, too.
Date: 05/25/2009 When you get enough of the tire over the rim, so it stays and doesn't jump back, you can just pull the rest of it with your hand.
Date: 05/25/2009
Date: 05/25/2009
Date: 05/25/2009
putting a new tire on Date: 05/26/2009 The first side of a tire goes on easily. It might even go on without using tire irons.
new tire (close up) Date: 05/26/2009 If the first bead doesn't go on the rim easily, I just use 2 small tire irons to move it over. Lube helps, too.
Date: 05/26/2009
new tire, second bead Date: 05/26/2009 The same idea as with removing the tire, you need to get as much clearance as possible -- to get the last bit of the tire over the rim. Making a helper to stand on the tire or compressing it with your knees does the trick.
Date: 05/26/2009 I pull bead over the rim in small sections. This requires much less effort and less prone to breaking things... yes, you can rip a tire bead or bend a rim if you apply a lot of force.

I use 3 tire irons to do this job, but I was told it can be done with just 2. My technique is not perfect, I guess.
all done Date: 05/26/2009
balancing tire Date: 05/26/2009
Date: 05/26/2009
[-]
Stop   Pause   Back One Image   Show More Info   delay:   direction:   max size: