tools: tire changing machine
Date: 05/25/2009
3 small tire irons, 2 rim protectors and more plastic for protecting the rim -- all one needs to change a tire.
tools: rubber lubricant
Date: 05/25/2009
This makes job much easier. Some people like using soapy water, I bought a gallon of something that is safe for both -- a rim and a tire. with 4-6 tire changes a year, 1 gallon of this stuff will last for many, many years.
tools: balancer
Date: 05/25/2009
The most expensive of all my tire changing tools - static wheel balancer by Marc Parnes http://www.marcparnes.com/. I had to buy it as K12gt has single side swingarm and the wheel doesn't have axle/bearings.
This is a really nice, high quality, tool. Plus, I found regular use for jack stands, too.
tools: bead breaker
Date: 05/25/2009
8' 2"x4" works great if you have something heavy to stick it under. A car will do, for example, but I have a workbench, so I use that.
tools: bead breaker (closeup)
Date: 05/25/2009
a small piece of 2"x4" under 8' lever, and bead breaks with ease. Not as convenient as purpose built bead breaker, but the price is right and replacement parts available in your local friendly Home Depot or hardware store.
tools: knees
Date: 05/25/2009
Another thing you need for this cheap tire changing to work, is good knees. That can be substituted with a helper, though. Good knees make it a one person job :-)
The idea is that you have to push the opposite side of the tire inside of the rim to gain as much clearance as you can. This makes popping the tire over the rim really easy and doesn't require much force. Lubing the edge of the rim and the tire bead helps, too.
Date: 05/25/2009
When you get enough of the tire over the rim, so it stays and doesn't jump back, you can just pull the rest of it with your hand.
Date: 05/25/2009
Date: 05/25/2009
Date: 05/25/2009
putting a new tire on
Date: 05/26/2009
The first side of a tire goes on easily. It might even go on without using tire irons.
new tire (close up)
Date: 05/26/2009
If the first bead doesn't go on the rim easily, I just use 2 small tire irons to move it over. Lube helps, too.
Date: 05/26/2009
new tire, second bead
Date: 05/26/2009
The same idea as with removing the tire, you need to get as much clearance as possible -- to get the last bit of the tire over the rim. Making a helper to stand on the tire or compressing it with your knees does the trick.
Date: 05/26/2009
I pull bead over the rim in small sections. This requires much less effort and less prone to breaking things... yes, you can rip a tire bead or bend a rim if you apply a lot of force.
I use 3 tire irons to do this job, but I was told it can be done with just 2. My technique is not perfect, I guess.